Qwen3.8 27B (high) leads on average score with 8.4 vs 8.2. Local hardware cost was not measured, so cost comparisons are unavailable. Claude Sonnet 5 (medium) is faster at 12.54s vs 167.89s, with pass rates of 75.8% vs 77.3%.
Last updated at:
2026-08-15
Rank
#47
Total Output Tokens
63,204
Response Time (avg)
12.54s
Total Cost
$0.922
Rank
#42
Total Output Tokens
656,635
Response Time (avg)
167.89s
Total Cost
N/A
Recommended modelClaude Sonnet 5 (medium)
Its score stays close to the best score here (8.2 vs 8.4), while responding about 13.4x faster than Qwen3.8 27B (high).
Qwen3.8 27BQwen3.8 27BhighCandidate responses were generated on local hardware. OpenRouter was used only for judging.Release: 2026-08-14
Score
8.2Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
8.4Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
Rank
#47
#42
Reliability
10.0First-attempt success score: 10.0 means no retryable target API or rate-limit failures before successful calls; tracked failures lower the score.…
9.6First-attempt success score: 10.0 means no retryable target API or rate-limit failures before successful calls; tracked failures lower the score.…
Consistency
9.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
9.2Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
Attempts
66/66
66/66
Tests Correct
A test is fully passed only if every run passed for that test.Wrong answer: 5Did not follow instructions: 1Invalid tool call: 1Response Time (avg)12.54sResponse Time (max)66.71sResponse Time (total)275.90sA test is fully passed only if every run passed for that test.…
A test is fully passed only if every run passed for that test.Did not follow instructions: 2No answer: 2Wrong answer: 2Response Time (avg)167.89sResponse Time (max)640.85sResponse Time (total)3693.54sA test is fully passed only if every run passed for that test.…
Attempt pass rate
75.8%Attempt pass rate = passed attempts / total attempts across runs.…
77.3%Attempt pass rate = passed attempts / total attempts across runs.…
Flaky tests
3Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
2Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
Total Runs
66Total Runs…
66Total Runs…
Cost per result
6.144Shows the average cost per correct benchmark answer in cents (lower is better).…
N/AShows the average cost per correct benchmark answer in cents (lower is better).…
Total Cost
$0.922Total Cost (Current Price)…
N/ATotal Cost (Current Price)…
Input Price
$2.000 / 1MInput Price…
N/AInput Price…
Output Price
$10.000 / 1MOutput Price…
N/AOutput Price…
Total Input Tokens
145,953Total Input Tokens…
100,179Total Input Tokens…
Output Tokens
52,330Output Tokens…
904Output Tokens…
Reasoning Tokens
10,874Reasoning Tokens…
655,731Reasoning Tokens…
Response Time (avg)
12.54sResponse Time (avg)…
167.89sResponse Time (avg)…
Response Time (max)
66.71sResponse Time (max)…
640.85sResponse Time (max)…
Response Time (total)
275.90sResponse Time (total)…
3693.54sResponse Time (total)…
Parameters
~1T total (~100B active)
27.3B
Availability
Closed
Weights available
Model generation showcase
Hamster playing table tennis
Prompt: Create a detailed SVG illustration of a hamster playing table tennis.
#47 Claude Sonnet 5
medium
Cost
$0.007
Time
6.4s
Tokens
832 tok
#42 Qwen3.8 27B
highCandidate responses were generated on local hardware. OpenRouter was used only for judging.
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)3.80sResponse Time (max)5.73sResponse Time (total)15.21sA test is fully passed only if every run passed for that test.…
3.80sResponse Time (avg)…
834Total Input Tokens…
1,220Output Tokens…
446Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)8.10sResponse Time (max)21.48sResponse Time (total)32.40sA test is fully passed only if every run passed for that test.…
9.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
7.9Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
88.9%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)17.28sResponse Time (max)31.73sResponse Time (total)51.84sA test is fully passed only if every run passed for that test.…
17.28sResponse Time (avg)…
10,590Total Input Tokens…
13,153Output Tokens…
2,379Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
8.1Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
7.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
88.9%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Did not follow instructions: 1Response Time (avg)248.62sResponse Time (max)458.25sResponse Time (total)745.85sA test is fully passed only if every run passed for that test.…
7.3Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
6.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
83.3%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Invalid tool call: 1Response Time (avg)51.86sResponse Time (max)66.71sResponse Time (total)103.73sA test is fully passed only if every run passed for that test.…
51.86sResponse Time (avg)…
107,934Total Input Tokens…
23,169Output Tokens…
5,371Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)185.57sResponse Time (max)333.21sResponse Time (total)371.15sA test is fully passed only if every run passed for that test.…
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)3.16sResponse Time (max)3.47sResponse Time (total)6.32sA test is fully passed only if every run passed for that test.…
3.16sResponse Time (avg)…
10,503Total Input Tokens…
312Output Tokens…
0Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)34.85sResponse Time (max)57.71sResponse Time (total)69.71sA test is fully passed only if every run passed for that test.…
5.3Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
33.3%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 2Response Time (avg)20.54sResponse Time (max)56.94sResponse Time (total)61.61sA test is fully passed only if every run passed for that test.…
20.54sResponse Time (avg)…
972Total Input Tokens…
12,137Output Tokens…
1,994Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
5.3Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
33.3%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No answer: 1Wrong answer: 1Response Time (avg)526.74sResponse Time (max)640.85sResponse Time (total)1580.21sA test is fully passed only if every run passed for that test.…
4.8Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
3.2Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
33.3%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Did not follow instructions: 1Response Time (avg)4.32sResponse Time (max)4.32sResponse Time (total)4.32sA test is fully passed only if every run passed for that test.…
4.32sResponse Time (avg)…
708Total Input Tokens…
264Output Tokens…
0Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
5.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Did not follow instructions: 1Response Time (avg)8.45sResponse Time (max)8.45sResponse Time (total)8.45sA test is fully passed only if every run passed for that test.…
9.9Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)3.10sResponse Time (max)3.61sResponse Time (total)6.20sA test is fully passed only if every run passed for that test.…
3.10sResponse Time (avg)…
909Total Input Tokens…
318Output Tokens…
269Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
9.8Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)8.24sResponse Time (max)10.18sResponse Time (total)16.49sA test is fully passed only if every run passed for that test.…
7.7Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
66.7%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)2.98sResponse Time (max)3.20sResponse Time (total)8.93sA test is fully passed only if every run passed for that test.…
2.98sResponse Time (avg)…
894Total Input Tokens…
407Output Tokens…
121Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
7.6Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
7.2Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
77.8%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No answer: 1Response Time (avg)199.90sResponse Time (max)569.33sResponse Time (total)599.69sA test is fully passed only if every run passed for that test.…
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)10.70sResponse Time (max)10.70sResponse Time (total)10.70sA test is fully passed only if every run passed for that test.…
10.70sResponse Time (avg)…
12,351Total Input Tokens…
433Output Tokens…
90Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)5.62sResponse Time (max)5.62sResponse Time (total)5.62sA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)7.06sResponse Time (max)7.06sResponse Time (total)7.06sA test is fully passed only if every run passed for that test.…
7.06sResponse Time (avg)…
258Total Input Tokens…
917Output Tokens…
204Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)263.98sResponse Time (max)263.98sResponse Time (total)263.98sA test is fully passed only if every run passed for that test.…