Muse Spark 1.2 (low) leads on average score with 8.4 vs 8.4. Local hardware cost was not measured, so cost comparisons are unavailable. Muse Spark 1.2 (low) is faster at 9.77s vs 167.89s, with pass rates of 77.3% vs 77.3%.
Last updated at:
2026-08-15
Rank
#38
Total Output Tokens
123,963
Response Time (avg)
9.77s
Total Cost
$0.655
Rank
#42
Total Output Tokens
656,635
Response Time (avg)
167.89s
Total Cost
N/A
Recommended modelMuse Spark 1.2 (low)
It has the best score here (8.4), while responding about 17.2x faster than Qwen3.8 27B (high).
Qwen3.8 27BQwen3.8 27BhighCandidate responses were generated on local hardware. OpenRouter was used only for judging.Release: 2026-08-14
Score
8.4Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
8.4Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
Rank
#38
#42
Reliability
10.0First-attempt success score: 10.0 means no retryable target API or rate-limit failures before successful calls; tracked failures lower the score.…
9.6First-attempt success score: 10.0 means no retryable target API or rate-limit failures before successful calls; tracked failures lower the score.…
Consistency
9.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
9.2Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
Attempts
66/66
66/66
Tests Correct
A test is fully passed only if every run passed for that test.Wrong answer: 4Did not follow instructions: 3Response Time (avg)9.77sResponse Time (max)47.80sResponse Time (total)214.83sA test is fully passed only if every run passed for that test.…
A test is fully passed only if every run passed for that test.Did not follow instructions: 2No answer: 2Wrong answer: 2Response Time (avg)167.89sResponse Time (max)640.85sResponse Time (total)3693.54sA test is fully passed only if every run passed for that test.…
Attempt pass rate
77.3%Attempt pass rate = passed attempts / total attempts across runs.…
77.3%Attempt pass rate = passed attempts / total attempts across runs.…
Flaky tests
3Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
2Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
Total Runs
66Total Runs…
66Total Runs…
Cost per result
4.361Shows the average cost per correct benchmark answer in cents (lower is better).…
N/AShows the average cost per correct benchmark answer in cents (lower is better).…
Total Cost
$0.655Total Cost (Current Price)…
N/ATotal Cost (Current Price)…
Input Price
$1.250 / 1MInput Price…
N/AInput Price…
Output Price
$4.250 / 1MOutput Price…
N/AOutput Price…
Total Input Tokens
101,811Total Input Tokens…
100,179Total Input Tokens…
Output Tokens
8,025Output Tokens…
904Output Tokens…
Reasoning Tokens
115,938Reasoning Tokens…
655,731Reasoning Tokens…
Response Time (avg)
9.77sResponse Time (avg)…
167.89sResponse Time (avg)…
Response Time (max)
47.80sResponse Time (max)…
640.85sResponse Time (max)…
Response Time (total)
214.83sResponse Time (total)…
3693.54sResponse Time (total)…
Parameters
~1T total (~50B active)
27.3B
Availability
Closed
Weights available
Model generation showcase
Hamster playing table tennis
Prompt: Create a detailed SVG illustration of a hamster playing table tennis.
#38 Muse Spark 1.2
low
Cost
$0.019
Time
14.6s
Tokens
4,384 tok
#42 Qwen3.8 27B
highCandidate responses were generated on local hardware. OpenRouter was used only for judging.
9.2Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
8.4Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
91.7%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Did not follow instructions: 1Response Time (avg)3.26sResponse Time (max)4.96sResponse Time (total)13.03sA test is fully passed only if every run passed for that test.…
3.26sResponse Time (avg)…
618Total Input Tokens…
382Output Tokens…
5,416Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)8.10sResponse Time (max)21.48sResponse Time (total)32.40sA test is fully passed only if every run passed for that test.…
8.4Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
7.4Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
88.9%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)10.09sResponse Time (max)13.60sResponse Time (total)30.28sA test is fully passed only if every run passed for that test.…
10.09sResponse Time (avg)…
7,275Total Input Tokens…
343Output Tokens…
19,717Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
8.1Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
7.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
88.9%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Did not follow instructions: 1Response Time (avg)248.62sResponse Time (max)458.25sResponse Time (total)745.85sA test is fully passed only if every run passed for that test.…
9.8Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)17.03sResponse Time (max)19.52sResponse Time (total)34.06sA test is fully passed only if every run passed for that test.…
17.03sResponse Time (avg)…
74,073Total Input Tokens…
5,751Output Tokens…
16,847Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)185.57sResponse Time (max)333.21sResponse Time (total)371.15sA test is fully passed only if every run passed for that test.…
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)4.22sResponse Time (max)5.57sResponse Time (total)8.44sA test is fully passed only if every run passed for that test.…
4.22sResponse Time (avg)…
6,969Total Input Tokens…
240Output Tokens…
2,972Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)34.85sResponse Time (max)57.71sResponse Time (total)69.71sA test is fully passed only if every run passed for that test.…
5.3Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
33.3%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 2Response Time (avg)28.53sResponse Time (max)47.80sResponse Time (total)85.59sA test is fully passed only if every run passed for that test.…
28.53sResponse Time (avg)…
738Total Input Tokens…
167Output Tokens…
54,780Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
5.3Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
33.3%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No answer: 1Wrong answer: 1Response Time (avg)526.74sResponse Time (max)640.85sResponse Time (total)1580.21sA test is fully passed only if every run passed for that test.…
5.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Did not follow instructions: 1Response Time (avg)8.46sResponse Time (max)8.46sResponse Time (total)8.46sA test is fully passed only if every run passed for that test.…
8.46sResponse Time (avg)…
477Total Input Tokens…
132Output Tokens…
2,182Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
5.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Did not follow instructions: 1Response Time (avg)8.45sResponse Time (max)8.45sResponse Time (total)8.45sA test is fully passed only if every run passed for that test.…
9.8Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)2.95sResponse Time (max)3.69sResponse Time (total)5.89sA test is fully passed only if every run passed for that test.…
2.95sResponse Time (avg)…
669Total Input Tokens…
117Output Tokens…
3,085Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
9.8Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)8.24sResponse Time (max)10.18sResponse Time (total)16.49sA test is fully passed only if every run passed for that test.…
8.7Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
7.7Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
88.9%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Did not follow instructions: 1Response Time (avg)5.17sResponse Time (max)7.82sResponse Time (total)15.52sA test is fully passed only if every run passed for that test.…
5.17sResponse Time (avg)…
651Total Input Tokens…
391Output Tokens…
6,460Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
7.6Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
7.2Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
77.8%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No answer: 1Response Time (avg)199.90sResponse Time (max)569.33sResponse Time (total)599.69sA test is fully passed only if every run passed for that test.…
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)3.58sResponse Time (max)3.58sResponse Time (total)3.58sA test is fully passed only if every run passed for that test.…
3.58sResponse Time (avg)…
10,158Total Input Tokens…
459Output Tokens…
833Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
10.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
100.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)5.62sResponse Time (max)5.62sResponse Time (total)5.62sA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)10.00sResponse Time (max)10.00sResponse Time (total)10.00sA test is fully passed only if every run passed for that test.…
10.00sResponse Time (avg)…
183Total Input Tokens…
43Output Tokens…
3,646Reasoning Tokens…
Qwen3.8 27BCandidate responses were generated on local hardware. OpenRouter was used only for judging.
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)263.98sResponse Time (max)263.98sResponse Time (total)263.98sA test is fully passed only if every run passed for that test.…