Command A+ (low) leads on average score with 3.0 vs 2.6. Decider V1.2 (default) has the lower benchmark cost at $0.001 vs $0.073. Decider V1.2 (default) is faster at 517ms vs 92.50s, with pass rates of 1.5% vs 24.6%.
Last updated at:
2026-10-17
Compared models
Rank
#418
Total Output Tokens
25,521
Response Time (avg)
92.50s
Total Cost
$0.073
Rank
#424
Total Output Tokens
67
Response Time (avg)
517ms
Total Cost
$0.001
Recommended modelDecider V1.2 (default)
Its score stays close to the best score here (2.6 vs 3.0), while costing about 75.2x less than Command A+ (low).
Decider V1.2Decider V1.2default36/69 attempts. Choices supplied by adapters. Supports 12/23 tests. Other tests are unsupported, not failed. Score uses the full suite.Release: 2026-10-17
Decider V1.2Decider V1.2default36/69 attempts. Choices supplied by adapters. Supports 12/23 tests. Other tests are unsupported, not failed. Score uses the full suite.Release: 2026-10-17
Score
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
2.6Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
Rank
#418
#424
Reliability
3.5First-attempt success score: 10.0 means no retryable target API or rate-limit failures before successful calls; tracked failures lower the score.…
9.4First-attempt success score: 10.0 means no retryable target API or rate-limit failures before successful calls; tracked failures lower the score.…
Consistency
9.6Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
4.9Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
Attempts
69/69
36/69
Tests Correct
A test is fully passed only if every run passed for that test.API error: 22Wrong answer: 1Response Time (avg)92.50sResponse Time (max)128.54sResponse Time (total)2127.40sA test is fully passed only if every run passed for that test.…
A test is fully passed only if every run passed for that test.Wrong answer: 5API error: 1Did not follow instructions: 1Response Time (avg)517msResponse Time (max)776msResponse Time (total)6.20sA test is fully passed only if every run passed for that test.…
Attempt pass rate
1.5%Attempt pass rate = passed attempts / total attempts across runs.…
24.6%Attempt pass rate = passed attempts / total attempts across runs.…
Flaky tests
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
Total Runs
69Total Runs…
36Total Runs…
Cost per result
0.000
0.020
Total Cost
$0.073
$0.001
Input Price
$0.300 / 1MInput Price…
$0.020 / 1MInput Price…
Output Price
$1.500 / 1MOutput Price…
$0.000 / 1MOutput Price…
Cache Read Price
$0.150 / 1MCache Read Price…
N/ACache Read Price…
Cache Write Price
N/ACache Write Price…
N/ACache Write Price…
Total Input Tokens
114,874Total Input Tokens…
48,363Total Input Tokens…
Output Tokens
1,992Output Tokens…
67Output Tokens…
Reasoning Tokens
23,529Reasoning Tokens…
0Reasoning Tokens…
Response Time (avg)
92.50sResponse Time (avg)…
517msResponse Time (avg)…
Response Time (max)
128.54sResponse Time (max)…
776msResponse Time (max)…
Response Time (total)
2127.40sResponse Time (total)…
6.20sResponse Time (total)…
Parameters
218B total (25B active)
27B
Availability
Open source
Open source
Cache prices apply to input tokens. Reads reuse cached prompts; writes store them and can cost extra. Output tokens use the output price.
Model generation showcase
Hamster playing table tennis
Prompt: Create a detailed SVG illustration of a hamster playing table tennis.
#418 Command A+
low
Provider returned error
Cost
$0.000
Time
0.2s
Tokens
0 tok
#424 Decider V1.2
default
No showcase result has been generated for this model yet.
2.8Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
1.6Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
33.3%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)128.54sResponse Time (max)128.54sResponse Time (total)128.54sA test is fully passed only if every run passed for that test.…
0.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
0.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)0msResponse Time (max)0msResponse Time (total)0msA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.API error: 4Response Time (avg)87.46sResponse Time (max)103.34sResponse Time (total)349.85sA test is fully passed only if every run passed for that test.…
5.8Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
7.5Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
50.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)491msResponse Time (max)496msResponse Time (total)1.47sA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.API error: 3Response Time (avg)86.43sResponse Time (max)92.24sResponse Time (total)259.28sA test is fully passed only if every run passed for that test.…
4.5Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
6.7Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
33.3%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)572msResponse Time (max)575msResponse Time (total)1.14sA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.API error: 2Response Time (avg)83.53sResponse Time (max)90.11sResponse Time (total)167.05sA test is fully passed only if every run passed for that test.…
0.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
0.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)0msResponse Time (max)0msResponse Time (total)0msA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.API error: 2Response Time (avg)85.39sResponse Time (max)99.05sResponse Time (total)170.77sA test is fully passed only if every run passed for that test.…
6.5Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
50.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)482msResponse Time (max)521msResponse Time (total)964msA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.API error: 3Response Time (avg)82.74sResponse Time (max)103.01sResponse Time (total)248.23sA test is fully passed only if every run passed for that test.…
5.9Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
7.2Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
55.6%Attempt pass rate = passed attempts / total attempts across runs.…
1Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.API error: 1Wrong answer: 1Response Time (avg)541msResponse Time (max)776msResponse Time (total)1.62sA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.API error: 1Response Time (avg)101.81sResponse Time (max)101.81sResponse Time (total)101.81sA test is fully passed only if every run passed for that test.…
0.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
0.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)0msResponse Time (max)0msResponse Time (total)0msA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.API error: 2Response Time (avg)105.69sResponse Time (max)116.28sResponse Time (total)211.38sA test is fully passed only if every run passed for that test.…
1.5Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
5.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Wrong answer: 1Response Time (avg)508msResponse Time (max)508msResponse Time (total)508msA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.API error: 3Response Time (avg)95.76sResponse Time (max)102.09sResponse Time (total)287.28sA test is fully passed only if every run passed for that test.…
1.7Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
3.3Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.Did not follow instructions: 1Response Time (avg)490msResponse Time (max)490msResponse Time (total)490msA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.API error: 1Response Time (avg)99.68sResponse Time (max)99.68sResponse Time (total)99.68sA test is fully passed only if every run passed for that test.…
0.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
0.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)0msResponse Time (max)0msResponse Time (total)0msA test is fully passed only if every run passed for that test.…
3.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
10.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.API error: 1Response Time (avg)103.52sResponse Time (max)103.52sResponse Time (total)103.52sA test is fully passed only if every run passed for that test.…
0.0Summarizes broad quality across our full private benchmark suite, so ranking reflects consistent performance.…
0.0Consistency score reflects run-to-run stability (10 = very consistent, even if consistently wrong).…
0.0%Attempt pass rate = passed attempts / total attempts across runs.…
0Flaky tests had mixed outcomes across runs (at least one pass and one fail).…
A test is fully passed only if every run passed for that test.No failed answers.Response Time (avg)0msResponse Time (max)0msResponse Time (total)0msA test is fully passed only if every run passed for that test.…